To download a .pdf of the magazine advert artwork specifications click here
To download a .pdf of the artwork for print specifications click here
Once the .pdf has opened in a separate browser window, you can either print the Specificatins out, or click on the diskette icon at the left hand end of the .pdf toolbar, underneath the word 'File', and save it to your hard disk.
Magazine artwork specifications
Imposition and Folding
To jump to a section, please click on the relevant link above.
Magazine advert artwork that is not in line with these specifications may be subject to amend charges. Out of Hand cannot accept responsibility for print errors where artwork has been supplied incorrectly. If you have any questions please do not hesitate to contact the studio.
to send an email, or phone the office on 0117 907 1280
Double Page Spread
- 210mm h x 297mm w (Including 3mm bleed on all sides)
- 210mm height x 148mm width (Including 3mm bleed on all sides)
Half Page Horizontal
- 100mm height x 141mm width (No bleed needed)
Half Page Vertical
- 204mm height x 70mm width (No bleed needed)
- 100mm height x 70mm width (No bleed needed)
1/4 Page horizontal
- 50mm height x 141mm width (No bleed needed)
Files should be supplied including bleeds and crop marks. Please centre all artwork within the document page and ensure no excess artwork remains on the art board.
IMPOSITION & FOLDING
All artwork supplied that requires a particular imposition or folding must be accompanied by printed proof that is imposed and folded as required.
Artwork for all adverts must include a 3mm bleed on all sides (see sizes above), all text and images should be at least a further 5mm from the crop guides. The easiest way of thinking of this if you are uncertain is to ensure the background image goes to right to the edge of the file and then all text, logos, etc are at least 8mm from the edges. To ensure correct printing an appropriate border will be added to all artwork supplied without correct bleeds.
All non-vector artwork should be supplied at a minimum of 300dpi, any artwork supplied lower than 300dpi will print blurred. EPS and Illustrator files should have their final output set to 2540. PDF’s should be set as follows; overall resolution of 2540, individual line art resolution of 1200dpi and individual bitmap resolution of 300dpi. An Out of Hand alternative to Acrobat Distiller’s Press settings is available on request; this is set exactly as required to achieve best possible results.
Artwork should be completed and saved in CMYK process, Out of Hand cannot take responsibility for any unexpected results experienced from artwork supplied in non-CMYK colour. Please delete all unused colour swatches from the colour palettes. Do not use Pantone or similar colours unless pre-arranged.
Maximum ink coverage must be no more than 240%, we recommend a vibrant black is created with 100% Key, 40% Cyan & 20% Magenta. Any thin text and/or artwork will not appear crisp if ink coverage is supplied too high.
All fonts used should be embedded (PDF’s) or converted to outlines (EPS, Illustrator). We can accept Mac fonts for Mac generated artwork but cannot accept any artwork that requires PC fonts. If Mac fonts are supplied please ensure all, and only the correct fonts, are supplied including both the postscript (printer) and screen fonts.
OVERPRINT / KNOCKOUT
Please ensure that no elements of the design are set to overprint unless specifically required. We cannot always check for this and it is likely to generate unexpected results.
If using the transparency functions in Illustrator and Freehand generated files, transparencies must be flattened and the files then converted to PDF or bitmap (TIFF or JPEG) before supplying. Transparency in vector programs is still in its infancy and Out of Hand can not accept any responsibility for any unwanted results if this is not done.
You should not change imposed picture sizes in Quark, the files should be re-sized in Photoshop /Illustrator and then imposed at their full size. You should also not use the text display attributes (Bold, Italic, etc) in Quark, instead use font families with suitable choices. Both these options may not work when the file is ripped and may generate unwanted results.
Please save all Photoshop files as either uncompressed TIF files or Photoshop EPS files. All Photoshop files must be flattened prior to saving, TIF files saved with layers or EPS files containing vector information may not work correctly when the file is ripped and may generate unwanted results.
Please save all Freehand generated files into editable EPS files.
COREL GENERATED FILES
Please convert all files generated in Coreldraw and Corel Photo-paint to bitmap files; (TIFF or JPEG). Saving Coreldraw documents as EPS files is possible but may alter the artwork - if you wish to do this please open the EPS files in Illustrator or Freehand to check they are as expected or impose in Quark and print a postscript file and again check that they are as expected.
ARTWORK ORIGINATION & SUPPLY METHOD
We advise that artwork is generated only in the following design programs; Photoshop, Illustrator, Freehand, Quark Xpress and Acrobat, Out of Hand cannot accept responsibility for any unwanted results from artwork originally generated in any other package (Please see the special note above regarding Corel which it is possible to use). This is especially true of ‘office’ programs such as Microsoft Word, Powerpoint, etc regardless of what options are available for final saving.
Artwork should be saved in PDF, EPS, TIFF, or JPEG format. Alternatively a Mac generated open application file can be supplied using one of the following applications (and previous versions). Please remember to include all fonts and images required (We can not except open PC files):
Adobe Photoshop 7
Adobe Illustrator 10
Quark Xpress 4.1
Files should be supplied uncompressed wherever possible; Stuffit / Drop Stuff may be used to compress files if necessary. Ideally artwork should be supplied on a CD or 100mb Zip disc. Artwork may only be emailed if the file size is less than 3 megabytes, please phone to pre-arrange this. All files over 3mb should be sent via ISDN or uploaded to our website, again please phone first to arrange this. ZIP discs will be returned after publishing. CDs will not be returned unless specifically requested at time of order. We also do not hold any supplied artwork.
All artwork must be supplied with a colour proof, Out of Hand cannot accept responsibility for any printing errors if no proof is supplied. All non bitmap artwork sent digitally must be sent with a clearly labeled JPEG proof.
We aim to check and prepare for print all artwork as soon as it received, if you need to amend your artwork and re-supply it you must phone the office to arrange this. Out of Hand cannot accept any responsibility if incorrect versions are printed when multiple versions have been supplied with no phoned instructions have been given. If the files are complex and take significant time to prepare for print a charge may be made for re-supplied files.
ARTWORK SUPPLY ADDRESS
Post artwork to:
Out of Hand Ltd
to email us your artwork.
If you have any questions or want further information please do not hesitate to contact the studio. Click here
to send an email, or phone the office on 0117 953 6363